Assignment Vinyl siding cleaner
Environmentally friendly Cleaner for regular washing of facades and vinyl siding from seasonal pollution. The balanced composition easily washes off atmospheric pollution, dust, soot, traces of mold and insects from the surface without causing harm.
The product perfectly cleans vinyl, acrylic, fiber cement, and other sidings, MDF and PVC panels, metal profile, terrace Board, painted wooden facades and other painted or polymer coatings outside and inside buildings.
This is what your siding can look like if you don’t take care of it
Description of vinyl siding cleaner
- Colorless and odorless liquid-concentrate;
- Innovative biodegradable formula, safe for lawn grass and flowers, trees and shrubs, as well as Pets and birds.
- Free of caustic solvents, chlorine, phosphates, acids, alcohols, and alkalis;
- Contains a preservative that prevents the formation of mold and the spread of other microorganisms on the surface;
- Contains antistatic agent that reduces the accumulation of dirt on the surface;
- After rinsing and does not leave stains and streaks;
- The composition of high concentration: one liter of the product is enough to clean up to 100 sqm of the surface.
- Suitable for both manual cleaning and pressure washing machine;
Let’s take a closer look at the basic properties of the cleaner
Distinctive features of the cleaner
Effectively dissolves and absorbs seasonal contamination from the surface of the siding without damaging the surface of the siding and the environment.
Does not leave stains, traces and stains – this is a very important difference that distinguishes a specialized cleaner from other cleaning products – After washing off dirt and drying siding you will not see on its surface whitish traces and stains!
Forms a protective antistatic film on the surface of the washed siding-so that your siding will remain clean longer and will not actively attract dust, flower pollen or insects, which is known to occur due to the formation of electrostatic stress on its surface.
You can wash the siding with a specialized cleaner both manually, with a bucket of water, a sponge or a brush, and by machine, using devices like “kerсher”.
Given the properties of the cleaner to absorb dirt from the surface of the siding panels and do not leave stains and stains after drying, you can easily update the look of your facade in just a few hours!
From 50 to 250 ml of the finished solution per 1 square meter of surface. The actual consumption depends on the application method, the degree of contamination and the ambient temperature.
Water, biodegradable surfactants (surfactants), antistatic, preservative.
Storage and transportation conditions:
In a tightly closed container, at a temperature not lower than + 5C and not higher than + 35C. Protect from cold and direct sunlight! Keep out of reach of children.
How to clean vinyl siding
Before applying the cleaner, moisten the treated surface with water. In a bucket or other container dilute the cleaner with water in a ratio of 1:10. Apply the product on the surface from the bottom to the top. To avoid damaging the surface, use a soft bristle brush or sponge. After applying the product is recommended to leave it on the surface for 5-10 minutes, but do not let it dry. Rinse with water is recommended from top to bottom. In case of severe contamination, the procedure can be repeated.
Before applying the cleaner, moisten the treated surface with water. Before use, dilute the product with water in a ratio of 1: 5. The detergent should be applied to the surface from the bottom to the top. After applying the product is recommended to leave it on the surface for 5-10 minutes, but do not let it dry. Rinse with water is recommended from top to bottom. For applying the solution to the surface, it is better to use a low – pressure spray nozzle, and for rinsing with water-a high-pressure nozzle.
Homemade vinyl siding cleaner
To remove dirt, you can use your own prepared composition, which can be made at home. This will require:
- A glass of washing powder( hand wash);
- A glass of detergent for dishes;
- A glass of oxygen bleach;
- Bucket of water.
The ingredients should be mixed until completely dissolved, after which the cleaner is applied to the contaminated areas with the help of a washcloth. For these purposes, a soft brush is suitable. Cleaning is carried out in several stages is divided into small areas. Apply the cleaner to the surface and leave for no more than 10 min. but do not let it dry. After cleaning, the surface is abundantly watered until the used composition is completely removed.